As an Amazon Associate I earn from qualifying purchases.
Gutter is quoted per linear foot with material and labour combined, so this calculator starts from typical installed US price bands for each material and multiplies by your measured footage. Choose five inch or six inch seamless aluminium, sectional vinyl, painted steel, copper or zinc, then set the house height and your regional cost level. The result is an installed range covering the gutter itself, the downspouts (priced per unit because each needs elbows, straps and a discharge detail), optional gutter guards, and removal and disposal of the old system. It also returns the all-in cost per linear foot, which is the single most useful number for comparing quotes: two bids that look wildly different usually differ on footage counted or downspouts included rather than on rate. Size the system before you price it, because an undersized gutter overshoots at the eave no matter how well it is hung.
Gutter installation is priced by the linear foot of eave, with downspouts, corners and end caps as separate items. Seamless gutter formed on site costs more per foot than sectional and leaks far less, because the joints are where sectional gutter fails.
| Eave run | Gutter with 10% waste | Downspouts | Downspout run | Hangers | Corners |
|---|---|---|---|---|---|
| 80 ft | 88 ft | 3 | 30 ft | 44 | 2 |
| 120 ft | 132 ft | 4 | 40 ft | 66 | 3 |
| 160 ft | 176 ft | 5 | 50 ft | 88 | 4 |
| 200 ft | 220 ft | 6 | 60 ft | 111 | 5 |
| 240 ft | 264 ft | 7 | 70 ft | 132 | 6 |
Downspout run doubles on a two-storey house, which is why the material list grows faster than the eave length does.
Gutters have to come off to replace the fascia and to fit new drip edge, so a reroof is the cheapest time to replace them. The crew is already set up at the eaves and the tear-off is already happening.
By the linear foot of eave, with downspouts, corners and end caps as separate items. Height, material, size and the condition of the fascia all move the per-foot rate.
Usually. It is formed on site from a coil so there are no joints along the run, and joints are where sectional gutter almost always leaks first.
It is much cheaper. The gutters have to come off anyway to fit new drip edge and replace the fascia, and the crew is already set up at the eaves.
One per 30 to 40 feet of gutter run and never fewer than two per gutter. A single downspout on a long run backs up in heavy rain whatever size the gutter is.
Need the whole roof at once? The free roofing calculator works out roof area, squares, shingle bundles, underlayment, drip edge, ridge cap and installed cost from one set of measurements.