As an Amazon Associate I earn from qualifying purchases.
Total cost for a vinyl panel fence — materials and labor.
With these inputs:
| Result | Value |
|---|---|
| Total project cost | $5,165 |
| Panels (8' each) | 19 |
| Posts | 22 |
| Concrete Bags | 35 |
| Panels | $1,805.00 |
| Posts cost | $770.00 |
| Concrete | $210.00 |
| Gates | $280.00 |
| Labor | $2,100.00 |
| Cost / LF | $34.43 |
Vinyl is no-paint, no-stain — higher upfront, lower lifetime cost.
The calculator divides fence length by panel width to count panels, adds one post per panel plus end posts and gate posts, then totals materials and labor.
Panels = ⌈length / panel width⌉; Posts = panels + 1 + gates × 2
Installed vinyl fences run $25–$60 per linear foot. Panel quality and reinforcement drive most of the cost difference.
25–40 years with virtually no maintenance. UV-resistant vinyl is rated for the full life of your home.
Yes — vinyl is one of the easier DIY fences because panels snap into routed posts. Skip the labor cost and save 30–50%.
Materials alone for 6 ft privacy vinyl run about $2,000 to $3,500 for 100 ft. Installed by a crew, expect $3,000 to $6,000 depending on your region and how many gates and corners you have.
Divide your fence length by the panel width — 6 or 8 ft — and round up. Then add one post per panel plus one to close the last run, and one extra panel per 50 ft for breakage.
Not upfront. Vinyl costs 30 to 60% more to install, but a wood fence needs staining every three years and replacing after 15 to 20. Over 20 years vinyl usually comes out even or slightly ahead.
Big-box 6 ft by 8 ft privacy panels are usually the least expensive option, with posts, caps and brackets sold separately. Price a full panel kit rather than the panel alone — caps, brackets and concrete add roughly 25% to the panel price.
A pre-hung 4 ft vinyl walk gate with hardware runs $250 to $500; a 10 to 12 ft double drive gate runs $700 to $1,500. Always use aluminum-reinforced gate posts or the gate will sag within a season.
Need the whole roof at once? The free roofing calculator works out roof area, squares, shingle bundles, underlayment, drip edge, ridge cap and installed cost from one set of measurements.