As an Amazon Associate I earn from qualifying purchases.
Installed fence costs about per foot for 4 ft chain link, for a 6 ft pressure-treated wood privacy fence and for 6 ft vinyl, before gates, tear-out and the permit. A 150 ft wood privacy fence comes to – . Enter your own length, height and material below.
Worked example
With these inputs:
Fence length (linear ft): 150
Fence height (ft): 6
Fence material: Wood — pressure-treated pine
Terrain: Flat or gentle slope
Number of gates: 1
Remove the old fence?: No — clear ground
Permit cost ($): 100
Result
Value
Estimated installed cost
$4,050
Materials
$1,800
Labor
$1,800
Gates
$350
Old fence removal
$0
Permit
$100
Budget range
$3,443 – $4,860
Cost per linear foot
$27.00
Regional labor swings ±30%. Use the low–high range when budgeting, not the single number.
How it works
Applies a per-foot material and labor rate for the material you picked, scales both by fence height against a 6 ft baseline, multiplies labor by a terrain factor, then adds gates at $350 each, tear-out at $4/ft and your permit fee.
Need the whole roof at once? The free roofing calculator works out roof area, squares, shingle bundles, underlayment, drip edge, ridge cap and installed cost from one set of measurements.