Deer Fence Calculator

Free deer fence calculator

As an Amazon Associate I earn from qualifying purchases.

Tall poly or metal mesh deer fence cost.

Worked example

With these inputs:

ResultValue
Total project cost$1,812
Deer Fence300 ft × 8'
Posts21
Mesh$1,350.00
Posts cost$462.00

Min 7 ft tall to deter deer; 8 ft is industry standard.

How it works

Counts posts at the chosen spacing (typically 15 ft for poly mesh), multiplies fence length by mesh cost, then totals.

Formula

Posts = ⌈length / spacing⌉ + 1; Total = mesh × LF + posts × $22

Frequently asked questions

How much does a deer fence cost?

For 8 ft poly mesh, materials run about $6 per linear foot: roughly $4.50 per foot of mesh plus a post every 15 ft at about $22 each. A 300 ft garden perimeter is about $1,800 in materials; metal mesh and professional installation cost more.

How much does it cost to deer fence an acre?

A square acre is about 835 ft around. At $4.50 per foot for 8 ft poly mesh and a $22 post every 15 ft, that is about $3,760 in mesh plus 57 posts at $1,250 — roughly $5,000 in materials, or $6 per foot. Add gates, corner bracing and labour if a contractor installs it.

How far apart should deer fence posts be?

15 ft is typical for poly mesh with a top tension wire, closing to 10–12 ft for metal mesh, in high-wind areas or on uneven ground. Corners and gate openings need heavier, braced posts.

Is poly or metal deer fence better?

Poly mesh is cheaper, lighter and nearly invisible, and it works for most gardens. Metal (welded or woven steel) resists chewing by rabbits and deer, lasts longer, and suits orchards and high-pressure areas — at a higher price per foot.

How tall does a deer fence need to be?

7 ft minimum, 8 ft preferred. Deer can easily clear 6 ft when motivated.

Will deer jump an 8 ft fence?

Rarely — at 8 ft, the visual barrier discourages all but the most determined deer.

Need the whole roof at once? The free roofing calculator works out roof area, squares, shingle bundles, underlayment, drip edge, ridge cap and installed cost from one set of measurements.