Gravel Delivery & Truck Load Calculator

Free delivery loads calculator

As an Amazon Associate I earn from qualifying purchases.

How many truck loads your order needs, and what the delivery portion of the bill will be.

Worked example

With these inputs:

ResultValue
Truck loads required2 loads
Delivery cost$180
Material cost$396 – $720
Total delivered$576 – $900
Order size18 tons (12 yd³)
Truck capacity12 tons per load
Full loads1
Final load6 tons
Spare capacity on last load6 tons
Delivery fee per load$90
Total delivery$180
Delivery cost per ton$10

Your last load is only 6 tons on a 12-ton truck, and you are paying a full haul fee for it. Consider trimming the order to 1 full loads, or adding 6 tons of stone you can use elsewhere.

How it works

Delivery is charged per trip, so the difference between ordering 11 tons and 13 tons can be an entire extra haul fee. This calculator shows how your order maps onto real truck capacities and where the next load boundary sits.

Frequently asked questions

How many tons of gravel fit in a dump truck?

A tandem-axle dump truck carries about 12 tons, a tri-axle about 18 tons, and a single-axle about 7. Semi and belly dumps carry up to 24 tons where access allows.

How much does gravel delivery cost?

Typically $60 to $150 per load as a flat haul fee. Because it is per trip and not per ton, a full load is always cheaper per ton than a partial one.

How much does a dump truck load of gravel cost?

On this site's 2026 bulk prices plus a $60–$150 haul fee: a 12-ton tandem load is about $324–$630 in crusher run and $420–$810 in #57 stone; an 18-ton tri-axle load is about $456–$870 in crusher run and $600–$1,140 in #57. Decorative stone such as river rock costs far more per load.

How many cubic yards is a dump truck load?

A tandem-axle dump holds roughly 8 to 10 cubic yards of gravel — capacity is limited by weight rather than volume, since gravel is dense.

Need the whole roof at once? The free roofing calculator works out roof area, squares, shingle bundles, underlayment, drip edge, ridge cap and installed cost from one set of measurements.